PDA

View Full Version : Turn signal question


wokeupscreamin
06-22-2005, 10:29 PM
I had to replace all 6 rear light sockets for the brake lights and reverse lights. They all work now however, when I put my turn signal on left, both sides blink and when I put it on right, the right side goes dark and the left side dims. The hazard lights work fine and brake and regular lights work fine. Does this mean I just need a new flasher for the turn signals?

68-GTO
06-23-2005, 12:10 AM
im not sure about that turn signal problem, but i was wondering if your icon is the car that you recently picked up. is that the car with the problem?

HOTROD64-STOCK69
06-23-2005, 12:57 AM
Sounds like a ground (or lack of) wire problem. It is a common problem and it is easy to cross up the wiring back there. I would suggest pulling out all the bulbs and then test the sockets to see they power up by themselves. If you trouble shoot with any bulbs in place you may get confusing data. Mike

wokeupscreamin
06-23-2005, 07:42 AM
im not sure about that turn signal problem, but i was wondering if your icon is the car that you recently picked up. is that the car with the problem?



Yes.. that would be the car. Why do you ask?