Trdbrd
12-03-2009, 10:59 AM
I had this built to run in my car but I cant fit a fly wheel shield on it due to firewall interference issues. I had to go with a J.W. ultra bell on a TH350. I had a friend buy it last month but he lost his job on 12/01 and I refunded his money. The transmission never left my garage as we were going to install it here this weekend.
The transmission is rebuilt and has not been run since the build. I ran it in my firebird with a 455 and 3.55 gears the car ran 11.40's then it now runs 10.7 -9.8. I would love to have OD in my car but I also need to meet the NHRA rules.
It comes with 2 torque converters. 3200-3400 PI Vigilante 9.5" single disc and a HD 11" 2200-2400 lock up converter.
The valve body is a BR6 GN valve body and the governor is from a GN also.
All the frictions and steels are Alto Reds with Keylone steels, 3 disc OD set.
It has a 300M billet input shaft
10 vane pump with a hardened stator.
Billet super servo with billet band anchor, Heavy duty wide band
.521 boost valve, .300 reverse boost valve.
Hardened sun shell
Rollerised center support
Art Carr input drum
Hughes deep aluminum pan
It comes with the transmission mount, Lokar TV cable and Dip stick, TV carb bracket.
$1600.00 FIRM
(253)882-9783
I also have a limited slip for a 8.2 BOP 10 bolt. This is for low 3 & 2 series gears. $250.00
The transmission is rebuilt and has not been run since the build. I ran it in my firebird with a 455 and 3.55 gears the car ran 11.40's then it now runs 10.7 -9.8. I would love to have OD in my car but I also need to meet the NHRA rules.
It comes with 2 torque converters. 3200-3400 PI Vigilante 9.5" single disc and a HD 11" 2200-2400 lock up converter.
The valve body is a BR6 GN valve body and the governor is from a GN also.
All the frictions and steels are Alto Reds with Keylone steels, 3 disc OD set.
It has a 300M billet input shaft
10 vane pump with a hardened stator.
Billet super servo with billet band anchor, Heavy duty wide band
.521 boost valve, .300 reverse boost valve.
Hardened sun shell
Rollerised center support
Art Carr input drum
Hughes deep aluminum pan
It comes with the transmission mount, Lokar TV cable and Dip stick, TV carb bracket.
$1600.00 FIRM
(253)882-9783
I also have a limited slip for a 8.2 BOP 10 bolt. This is for low 3 & 2 series gears. $250.00