5c heads good runners

[gto65lvr]

73 5c heads clean and ready to use. Came off a very good tight running 350 orig to the heads. ended up using the short block, put a solid cam in it and a pair of 16 heads to bump up the compression. Through in my pro streeter in my avatar and sold the car minus the IA2.

I don't see myself using these heads anytime soon and if someone needed a bolt on pair of heads they could trust and run a while these are them set up for stock cam.Never monkied with.

pic is of the 350 it came off of out of my 73 Trans am clone I am finishing up. I build a mild roller 400 motor for it. I guess I don't have a pic of the heads at this moment, but will add one for any interested parties

150.00

all my parts are come get in vancouver, portland area or a little more if you want me to meet you north a little, gotta cover gas would drive up to longview to help with your round trip time.

[Pontiacshack]

I may be interested. How bout a phone # I can reach you at and I'll give you a call.

Stef

[gto65lvr]

oopps

These ar 73 4c heads with screw in studs and look like the bigger valves versus the small.

No ground up or sunk valves these are good heads

came out of my 73 firebird factory 350 2bbl with a 3 speed stick and 308 gears.

Would trade for a nice restored GTO or new corvette LOL

[Pontiacshack]

Hi Eric, looking forward to picking up the heads, not sure I can make it down for a few days though. I'll try and give you a call tomorrow and see what we can work out.

Stefan.

[GTO_AL]

Stef,
Maybe we can work out a stop there on the way to Dufur?

[gto65lvr]

There ya go! It would be nice to say hi to ya al

I am only 5 mins off the freeway so no biggie.

There are always the holiday weekends LOL

[GTO_AL]

Eric,

My thoughts exactly. I figured you'd been to my house a couple times, it's about time I stop by yours. I need to go to Dufur to pick up some OHC stuff so thought this would be good time. What do you have for OHC stuff, anything? Looking for a power steering double pulley. I don't need anything really, just thought I'd start gathering some stuff since nobody else does. Still looking for a '66 wood wheel too. Not a priority but sometime, would like one for the Sprint.

Al

[Pontiacshack]

Eric, if you don't mind waiting, I hope to ride down with Al to Dufer. We could pick them up then if that works, just let me know.

Stef

[gto65lvr]

NO OHC stuff just a few odds and ends left been cleaning out the shop to lessen the holding onto stuff. Pulleys, some brackets and misc.

just keeping my 67 400 rebuilder and some goodies in case build another Pontiac engine and or car. If I do it will be a another 2nd gen TA as I have a few high end parts for that model. If I do build another one it will be a few years and it won't be built to be pretty. It will all go into the drivetrain.

[gto65lvr]

73 4c screw in stud small valve heads 196 166

bolt on and go make me a reasonable offer and they are yours
Steph has a big motor and so do I so we are both looking for the larger valved heads.