461 TOO MUCH MOTOR FOR ANYONE HERE!

[BLEGOAT]

OK,
I can't seem to get my pictures to come up on this page, so here is what I am going to do.

455-.030 over. 4.21 stroke/4.21bore.
6.8 C&A *Track master rods.
Ross flat top w/-7cc relief
C&A ring
JBP Tapered pins
JBE Splayed center caps, after market front cap.
Roll master timing chain w/roller cam and lifter.
Crank scraper, lifter bore resticktors,SD lifter bore brace,
Milodon kickout pan, neopren rear seal.
Asking $4000.00 OBO, for the short block.

72cc E-Heads
340cfm by SD. With flow sheets
All the best stuff in the heads.
Stud girdle etc.
PLUS a ported/gasket matched VICTOR DOM. intake that is polished.
Asking $3000.00

T-400 w/brake
Mike ultra t-400 w/trans brake. NEVER USED!
Comes with CSI ultra shield
CSI fly wheel.
Cost me $1400.00 plus shipping
Best real offer.

TCS 3800 stall
used 1 1/2 years. Anti balloning plate
BEST OFFER.
I think thats it. You can call or e-mail. If someone wants everything, then make the offer I can't turn down. ;)
Thanks.
360-671-3029
Bill Jarratt
BLEGOAT23red@msn.com 8)

[LonnieS]

You can email me the pics, and I can post them for you... ?
lonnies@northwestlegends.com

[BLEGOAT]

pics

[BLEGOAT]

pics

[BLEGOAT]

and more

[BLEGOAT]

more

[BLEGOAT]

last one

[BLEGOAT]

Let me know if there is anything else that someone would like to see.
If I am going to start breaking it open, I will need someone to be more than a looky lou.
Thanks.
Bill

[GTO_AL]

yep, that would have really looked good in that '70, but that engine would look good in any car :-)

[BLEGOAT]

It sure would, but I just can't afford to do to the car what it needs to have done to it.
I looked at parts, and the cost is a little more than I wish to spend.
::)

[1PROGTO]

Nice setup, thanks for the pics. Something to ponder.............

[BLEGOAT]

Still for sale!
What is out there for trade?
I will deal on some parts.

[BLEGOAT]

I sold it to a guy that can handle this BRUT!
This motor was just to much for anyone here to be able to handle.

[REED_RACING]

Or maybe it was more motor than you could handle! :-[

[Pontiacshack]

Dang, I just came into an extra 2 grand and was just about to give you a call. Oh well, I guess I'll just have to stick with my 215 straight six. I'm thinking I just might break into the 20's this year, YEEEEEEEHAAAAAAW! :P

[THOR]

Ummm, yeah, those V8 motors are a bit much
What's the point of all those extra foot pounds of torque and gobs of horsepower anyway? ???