headers

[69projects]

I have #62 heads on a 428 in a 69 GTO does someone out there have a set of headers in good shape for me?

[GPModJ]

I've got a set sitting around. They're pretty old and rusty (though far from rusted through) and were last on my GP but they're GTO headers. I don't know what brand they are but they seem to be a good set, as the flange is fairly thick, they've got the "lip" welded around the ports for a good seal.

They fit in the GP fairly well, though the neutral safety switch had to be removed. I think the neutral safety switch was an issue for the GP but shouldn't be a problem for a GTO.

When I get home, I'll take a shot and post it.

[69projects]

Okay thanks I'll look forward to the picture you can email it directly if you want: pvangaalen@shaw.ca

[GPModJ]

It took me a bit longer than I'd planned but here are the photos:

[GPModJ]

Here's the other side:

[GPModJ]

Also, I've posted some BIGA$$ED imagees at the following three URLs if you want a closeup. I warn you though, if you're connected via a dialup they'll take forever to load, as they're around 400 Kb each.

http://www.69grandprix.com/images/headers1_big.jpg

http://www.69grandprix.com/images/headers2_big.jpg

http://www.69grandprix.com/images/headers3_big.jpg

Actually, they're in better shape than I remember. Not sure what they're worth. There's the usual dent in the bottom of one primary where it smacked soemthing but there are no holes anywhere and look like they'd clean up nicely.