Hurst Linkage interchange question

[BirdsNest]

Any one know whether Hurst linkage for a BW T-10 will fit a Muncie?

The number on this linkage is 12500112 it's kind of hard to read. I measured the bolt holes at 3.0 between the mount holes, 3/8 mounting bolt holes. Looking at Muncie mounts they look similar.

Any help would be appreciated :)

[Dirty_Eds_Flagger]

If you haven't already answered your question on your own, contact Bill at 206-938-0324. He runs a tranny shop in West Seattle specializing in manual trans.

He'll probably be able to answer your question and, if the linkage is different, he'll likely have whatever you need to get moving.

Be sure to tell him John Price asked you to call.

[Mark B]

Yes it will fit, I replaced a muncie with a blown reverse gear with a T-10 and used the same linkage. This was many many years ago, but I don't think I am senile yet. :D